Flagship Machine Compatibility

Diamond Segments for Scanmaskin SM500

Scanmaskin SM500 crews need tooling matched to attachment fit, concrete hardness, application, and order risk. This page gives a practical starting point before you request a quote.

Request Scanmaskin SM500 tooling quote Open Bond Selector

Machine Snapshot

Machine	Attachment	Working class	Best-use jobs
Scanmaskin SM500	Scan-On	500 mm / Mid-size grinder	renovation crews, hard aggregate sections, mixed rooms

Bond and Grit Starting Point

Floor hardness	Bond	Opening grit	Why
Mohs 1-2	Hard	#30 / #16	Controls wear on soft or green concrete.
Mohs 3-4	Medium	#40	Balanced cut speed for general commercial slabs.
Mohs 5-6	Soft	#50	Exposes fresh diamond faster on dense concrete.
Mohs 7+	Extra Soft	#80	Reduces glazing on very hard aggregate.

Coating removal

PCD or aggressive metal tooling first, then metal bond cleanup.

Ask for a before/after scratch photo from the test pass.

Grinding

Use the bond table by floor hardness and keep passes even.

Move to the next grit only after scratches are consistent.

Polishing prep

Avoid skipping transition grits before resin pads.

Confirm the floor is flat before moving into higher grits.

Surface prep

Prioritize stable scratch profile and predictable tool life.

Choose a conservative first set when hardness is unknown.

QC Proof to Request

Request locking-face photo and a small first batch when the floor hardness is uncertain.

Segment height measurement.
Bond and grit label photo.
Quantity and packing count.
Carton mark and shipment reference.

Internal Links

Review Trust Center HS 6804 data

FAQ

Which bond should I start with on Scanmaskin SM500?

Start from floor hardness: hard bond for Mohs 1-2, medium for Mohs 3-4, soft for Mohs 5-6, and extra-soft for Mohs 7+.

How do I confirm Scan-On fit before ordering?

Send the grinder model, tooling plate photo, and current holder condition so attachment fit can be checked before the order moves forward.

Can I request QC proof before shipment?

For qualified orders, request inspection photos or video covering label, segment height, quantity, packing count, and shipment mark.